🍽️
Frigidaire Dishwasher · Error Code
CODE i40 · also shows iF0

Frigidaire i40Clogged filter/sump or drain restriction (i40)

A Frigidaire i40 means a clogged filter/sump or a drain restriction — water isn't moving through the drain path the way it should. It's mostly a free fix: pull and rinse the filter, clear the sump, and check the drain hose for a kink or a disposal knockout plug. A drain pump is the part only if the whole path is clear and it still won't drain.

🔧 From our repair bench: i40 is a restriction code — 90% of them clear by rinsing the filter and clearing the sump.

🐜 Straight talk: this points you at the likely cause — it's not a guarantee, and every machine is different. Cut the power (and shut off gas or water) before you touch anything, test to confirm the part is actually bad before you buy, and if it's beyond you, get a pro. No shame in that.

What the code means

i40: Clogged filter/sump or drain restriction (i40)

Clogged filter/sump or drain restriction (i40).
Most likely causes
  • Clogged Glass Trap/Filter
  • Drain Line Restriction
The 2-minute test → Clean the glass trap + filter, clear the drain line, then re-run.
The kit

The Tools to Test + Fix With

You don't need a shop full of tools — you need these. The multimeter is the one that pays for itself the first time it stops you buying the wrong part on a fault code.

Digital multimeter

Test a suspect part for continuity BEFORE you buy — the single best way to avoid replacing the wrong thing on a fault code.

🔎 On Amazon →

Nut driver set (¼" + 5⁄16")

Most appliance panels are held on with ¼" and 5⁄16" hex screws.

🔎 On Amazon →

Screwdriver set (Phillips/flat/Torx)

Covers the odd panel screw and the Torx fasteners many brands use.

🔎 On Amazon →
Fix it — two honest options

The Fix — Free Checks First, Then the Part

Work top-down: the free checks before you spend a dime, and test to confirm the part is actually bad before you buy. When it is a part, you get both options — the genuine OEM part sourced through us and shipped to your door, or a budget aftermarket part on Amazon. Your call.

Free fixFree

No part — clean filter, sump & hose

Rinse the filter, scoop the sump, straighten the drain hose, and confirm a new disposal's knockout plug was removed. Clears most i40 codes.

✅ No part needed — try this first
Moderate DIY$30–80

Drain pump

If the filter, sump, and hose are clear but it still won't drain. Match your model.

Prices shown are typical aftermarket ranges and vary by brand and model — genuine OEM is priced by quote when you request it. Amazon links open a search so you can match your exact model number; as an Amazon Associate, Appliance Ant may earn from qualifying purchases at no extra cost to you. Always confirm the part fits your model.

Can you fix it yourself?

Safe to Try · Know the Risk · Call a Pro

General guidance, not professional advice. Always unplug the appliance (or shut off the gas/water) before you check anything. If it feels beyond you, that's exactly when to get a pro.

✅ Safe to try yourself

  • Remove the bottom rack, rinse the filter, and scoop the sump.
  • Check the drain hose for kinks and clogs.
  • Confirm a newly-installed disposal's knockout plug was removed.

⚠️ Doable — know the risk

  • Drain pump replacement — moderate; cut power and shut the water off.

🛑 Call a pro — don't touch this

  • A leak reaching the wiring/control under the tub.
Is it worth fixing?

The Honest Call

Usually free — i40 is a restriction. Only a drain pump ($30–80) is a real spend, still under a new dishwasher.

In Middle Tennessee or Louisiana?

Don't want to DIY it? Our own family of technicians will come clear that i40 for you — honest flat pricing, usually same-day, 4.5★ from 1,000+ neighbors.

🔧 Get it fixed by our techs →
FAQ

People Also Ask

What does i40 mean on a Frigidaire dishwasher?
A clogged filter/sump or drain restriction — water isn't moving through the drain path. Mostly a free fix; a failed drain pump only if the path is clear and it still won't drain.
How do I fix a Frigidaire i40 code?
Rinse the filter, clear the sump, and check the drain hose for kinks and a disposal knockout plug. If it still won't drain, replace the drain pump.
Related codes

Other Codes & Fixes