E64: Heating element open circuit
- Heating Element
- Wiring
The Tools to Test + Fix With
You don't need a shop full of tools — you need these. The multimeter is the one that pays for itself the first time it stops you buying the wrong part on a fault code.
Digital multimeter
Test a suspect part for continuity BEFORE you buy — the single best way to avoid replacing the wrong thing on a fault code.
🔎 On Amazon →Nut driver set (¼" + 5⁄16")
Most appliance panels are held on with ¼" and 5⁄16" hex screws.
🔎 On Amazon →Screwdriver set (Phillips/flat/Torx)
Covers the odd panel screw and the Torx fasteners many brands use.
🔎 On Amazon →The Fix — Free Checks First, Then the Part
Work top-down: the free checks before you spend a dime, and test to confirm the part is actually bad before you buy. When it is a part, you get both options — the genuine OEM part sourced through us and shipped to your door, or a budget aftermarket part on Amazon. Your call.
Heating element
The E64 fix. Test for continuity with a multimeter — an open element confirms it. Match your model.
Also clear the vent
A blocked vent overheats and shortens element life. Clean the lint screen and full duct when you replace the element.
✅ No part needed — try this firstPrices shown are typical aftermarket ranges and vary by brand and model — genuine OEM is priced by quote when you request it. Amazon links open a search so you can match your exact model number; as an Amazon Associate, Appliance Ant may earn from qualifying purchases at no extra cost to you. Always confirm the part fits your model.
Safe to Try · Know the Risk · Call a Pro
General guidance, not professional advice. Always unplug the appliance (or shut off the gas/water) before you check anything. If it feels beyond you, that's exactly when to get a pro.
✅ Safe to try yourself
- UNPLUG the dryer (240V) before anything.
- With a multimeter, test the heating element for continuity — no continuity = open element.
- Clean the vent run so the replacement element doesn't cook itself.
⚠️ Doable — know the risk
- Heating element replacement — moderate; unplug, open the cabinet, swap the element assembly.
🛑 Call a pro — don't touch this
- The 240V wiring/terminal block, or a control board fault.
The Honest Call
Worth it — the element is $30–70 and an hour versus $500+ new. A standard, cost-effective dryer repair.
In Middle Tennessee or Louisiana?
Don't want to DIY it? Our own family of technicians will come clear that E64 for you — honest flat pricing, usually same-day, 4.5★ from 1,000+ neighbors.
🔧 Get it fixed by our techs →