LC: Leakage detected (LE / 1C)
- Leak At Hose/Tub
- Leak Sensor In Base
- Overfill
The Tools to Test + Fix With
You don't need a shop full of tools — you need these. The multimeter is the one that pays for itself the first time it stops you buying the wrong part on a fault code.
Digital multimeter
Test a suspect part for continuity BEFORE you buy — the single best way to avoid replacing the wrong thing on a fault code.
🔎 On Amazon →Nut driver set (¼" + 5⁄16")
Most appliance panels are held on with ¼" and 5⁄16" hex screws.
🔎 On Amazon →Screwdriver set (Phillips/flat/Torx)
Covers the odd panel screw and the Torx fasteners many brands use.
🔎 On Amazon →The Fix — Free Checks First, Then the Part
Work top-down: the free checks before you spend a dime, and test to confirm the part is actually bad before you buy. When it is a part, you get both options — the genuine OEM part sourced through us and shipped to your door, or a budget aftermarket part on Amazon. Your call.
No part — cut detergent & check for a leak
Use 1–2 teaspoons of HE detergent and run a rinse to clear suds. Check the fill/drain hoses, clamps, and the door boot fold. Many LC codes clear here.
✅ No part needed — try this firstFix the leak source (hose / pump / boot)
If water keeps pooling in the base, find and replace the leaking part — a hose/clamp, the drain pump seal, or a torn door boot.
Prices shown are typical aftermarket ranges and vary by brand and model — genuine OEM is priced by quote when you request it. Amazon links open a search so you can match your exact model number; as an Amazon Associate, Appliance Ant may earn from qualifying purchases at no extra cost to you. Always confirm the part fits your model.
Safe to Try · Know the Risk · Call a Pro
General guidance, not professional advice. Always unplug the appliance (or shut off the gas/water) before you check anything. If it feels beyond you, that's exactly when to get a pro.
✅ Safe to try yourself
- Reduce HE detergent to 1–2 teaspoons and run a rinse to clear suds.
- Pull the washer out and check the fill + drain hoses and clamps.
- On a front-loader, wipe the door boot fold and check it for tears.
⚠️ Doable — know the risk
- Replacing a leaking hose, pump seal, or door boot — moderate; power and water off, expect spillage.
🛑 Call a pro — don't touch this
- A leak reaching the motor/control board, or a leak you can't locate.
The Honest Call
Often free (just too much soap). A real leak part is $15–90 — still far under a new washer.
In Middle Tennessee or Louisiana?
Don't want to DIY it? Our own family of technicians will come clear that LC for you — honest flat pricing, usually same-day, 4.5★ from 1,000+ neighbors.
🔧 Get it fixed by our techs →