F9: Oven not heating / not reaching temp
- Bake Element Or Igniter
- Bake Relay On Control
- Oven Sensor
The Tools to Test + Fix With
You don't need a shop full of tools — you need these. The multimeter is the one that pays for itself the first time it stops you buying the wrong part on a fault code.
Digital multimeter
Test a suspect part for continuity BEFORE you buy — the single best way to avoid replacing the wrong thing on a fault code.
🔎 On Amazon →Nut driver set (¼" + 5⁄16")
Most appliance panels are held on with ¼" and 5⁄16" hex screws.
🔎 On Amazon →Screwdriver set (Phillips/flat/Torx)
Covers the odd panel screw and the Torx fasteners many brands use.
🔎 On Amazon →The Fix — Free Checks First, Then the Part
Work top-down: the free checks before you spend a dime, and test to confirm the part is actually bad before you buy. When it is a part, you get both options — the genuine OEM part sourced through us and shipped to your door, or a budget aftermarket part on Amazon. Your call.
Bake element (electric)
If the element doesn't glow bright red or is visibly split. Two screws inside the oven — cut power first. Match your model.
Gas oven igniter (gas)
If the igniter glows but never lights the burner. Gas job — shut off gas + power, or call a pro.
Oven temperature sensor
If the element/igniter is fine but it still won't reach temp — a cold sensor reads ~1080Ω. Match your model.
Prices shown are typical aftermarket ranges and vary by brand and model — genuine OEM is priced by quote when you request it. Amazon links open a search so you can match your exact model number; as an Amazon Associate, Appliance Ant may earn from qualifying purchases at no extra cost to you. Always confirm the part fits your model.
Safe to Try · Know the Risk · Call a Pro
General guidance, not professional advice. Always unplug the appliance (or shut off the gas/water) before you check anything. If it feels beyond you, that's exactly when to get a pro.
✅ Safe to try yourself
- Turn on bake and watch — a healthy electric element glows bright red across its length; a gas igniter should light the burner.
- Check for a tripped breaker (electric ovens are 240V).
- Confirm the oven isn't in a delay/timer/Sabbath mode.
⚠️ Doable — know the risk
- Electric bake element or temp-sensor swap — moderate; cut power at the breaker (240V) first.
🛑 Call a pro — don't touch this
- Anything on a gas oven — igniter, valve, or a gas smell.
- The 240V wiring or an oven control board.
The Honest Call
Worth it for an element or sensor ($15–60) versus $700+ for a new range. A gas igniter is cheap too but a gas job.
In Middle Tennessee or Louisiana?
Don't want to DIY it? Our own family of technicians will come clear that F9 for you — honest flat pricing, usually same-day, 4.5★ from 1,000+ neighbors.
🔧 Get it fixed by our techs →